Friday, 6 July 2012

Get Carpet Ink Stains Out of the Way

Imagine for a moment that you are working on some documents and your pen gets broken, spilling a considerable amount of ink on your shirt. This is one of those things that can really make a person go off-the-rails. The most frustrating stain would be an ink stain on light-colored pants, t-shirt, shirt or carpet. I am certain that many carpet-owners have experienced how difficult it is to get rid of an ink stain that ended up on their carpet. Indeed, if you let an ink stain stay for a while, it will become more difficult to clean and could damage the fiber of your carpet.

Though it is not easy to clean ink off a light-colored carpet, it is not impossible. Actually, to get the best out of your carpet cleaning efforts, you need some helpful tips on how to go about it. There are several steps to follow if you must get rid of an ink stain on your carpet.

First, you must ensure that the stain is treated immediately it gets on the carpet. This is the first treatment you should give your carpet. This remedial action prevents the stain from becoming more difficult to clean. When you let the ink stain sit longer than it should, then you are in for a difficult carpet cleaning session. Remember, the best moment for your carpet cleaning magic to work on an ink stain is immediately it occurs.

Secondly, you would want to start by getting a neat cloth, preferably cotton-made. You will throw some alcohol on this piece of cloth. The best type of alcohol to address this situation would be Isopropyl. After the alcohol has soaked in, use the said cloth to blot out the stain from the affected area. The ink will slowly move from the carpet to the cloth. This step should be repeated several times. You must repeat this process until there is no longer any ink on the alcohol-soaked-cloth when rubbed on the affected area.

However, if this process does not completely get rid of the ink, get some carpet cleaning product from the nearest store and use it on the stain. After step one, the stain will be greatly reduced and this second step should help even more. As with the alcohol, apply the product on a clean cloth and blot the affected area. After two to four times of blotting, the stain should no longer be visible.

Indeed, remember to rinse the area you have just treated with clean water so that no residue should accumulate on the carpet.

To conclude, it is very important to have a few carpet cleaning tips under your sleeves so that your carpet cleaning endeavors would yield much.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

Thursday, 5 July 2012

A Great Cleaning Service Begins With Great People

Wouldn't you enjoy having your home or business polished by expertly trained and hard working people who take pride in what they do?

In the wonderful day and age we all live in, this is entirely possible.

Everyone seems to live a demanding lifestyle. Our days are chock full of running errands, chauffeuring the kids to ball games or doing a multitude of other things. Plus, most of us work outside the home during the daylight hours. Needless to say, daily necessities do not allow for extra precious time to clean our homes or businesses.

That's really not a good thing.

Many people are simply so busy they have no choice but to hire a cleaning service.

When you reach this point, the very first thing you must look for is the kind of people your intended cleaning service hires. As mentioned above, the "must haves" are fully qualified, hard working, and proud professionals.

Next, when you interview them, consider whether you can trust this company. That's very important too. You can always ask your friends or neighbors if they have used them and if they felt totally comfortable with having them in your home. Some people elect to have them tidy up while they are at their place of employment so this quality is of utmost importance. Be sure to ask the company manager if background checks are regularly performed on their employees.

For peace of mind, ask if they are fully bonded and licensed and if they offer any sort of guarantee on their work.

Another nice amenity of a cleaning service is that work can be regularly scheduled to meet your schedule, not theirs. Most services will attend to your needs either weekly, bi-weekly or even monthly - whatever suits you. They will even clean your home or business one time only if you're moving in or out of your home.

Another vital question to ask is whether you will have to sign a contract? Most companies do not require this, but it's better to ask up front.

Remember how much a tidy house once made you feel so good inside, so inspired? You felt as if you could soar to greater heights. You could actually rush to the door when the bell rings, swing it wide open and tell whoever is standing there, "Oh, do come in (even it's just the UPS man)." You can experience that phenomenal feeling once more when you allow these busy little bees transform your home into a palace - a clean palace.

It's been said a home is like a castle to a man, (or woman). If that's the case, then why on earth would you ever do the dirty work yourself? Kings and queens do not do that! You are the king or queen of your home, so neither should you.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

Wednesday, 4 July 2012

What To Look For in a Dumpster Rental Company

No matter why you need a dumpster, whether it's commercial or personal, you will more than likely need to rent one from a dumpster rental company. While you may believe that a dumpster is a dumpster, the company you rent from may still greatly impact your overall experience and final costs. Here are some things to look for in your dumpster rental company.

Seek Experience
In a business that relies so heavily on repeat customers and overall reputation, you want a dumpster rental company that has weathered the long haul and survived: in short, an established and experienced company. Many of the dumpster rental businesses you may find may end up being untrustworthy pop up rental companies that exist for one or two years, crumble under a poor reputation, and then pop up somewhere else under a different name, trying to pull the same tricks. A well-established company will have none of these issues and will be able to prove worthy of their reputation. As an added precaution, feel free to check reviews for every company you consider and ask for references if you like. Good reviews and good references will be an easy determiner of a truly excellent company.

Go Local
Locally owned businesses have much more to gain from having your business, so they will go out of their way to actually earn your business through excellent customer service and dedicated employees. Larger corporations can take or leave your business, so they will not go out of their way to make sure that you are satisfied with their performance. In addition, larger waste managing corporations have huge overhead fees that smaller local companies do not, and they will often pass on those costs to their customers who believe that their big name will provide better service for the price.

How Do They Handle Waste?
The dumpster rental business is a simple one: you pay to rent and fill a dumpster, then the company pays to dump the dumpster's contents into a landfill. When a company pays for everything it dumps, it either goes out of its way to dump as little as possible or it passes the costs of dumping everything onto its customers. Try to find a dumpster rental company that recycles or donates everything it can from its dumpsters before hauling them to the landfill. Not only will you be certain that the dumpster rental company is trying to save you from additional costs, but you can feel comfortable knowing that they're helping to save the environment by diverting trash from the landfills into more eco-friendly avenues.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

Tuesday, 3 July 2012

Butcher Chopping Block Maintenance: How to Clean and Oil in Five Easy Steps

Wooden counter tops add warmth and beauty to any kitchen. Unlike other trendy counter top surfaces, wooden counter tops are timeless and never go out of style. They also add functional value to a kitchen that appeals to chefs and foodies. However, they are not completely care free. They need to be kept clean and sealed in order to maintain the surface. Proper maintenance will not only lengthen the life of your counter top, but will keep it hygienic. Five easy steps for maintaining all of your wooden cutting surfaces, including counter tops and chopping blocks are listed below.

You will need:

Dish detergent

Scrubby sponge

White vinegar

Either lemon juice and salt Or water and baking soda

Mineral oil

Step one - Clean.

Cleaning the board with warm soapy water and a scrubbing sponge will get off any visible debris and will remove a small amount of oil from the board. Use warm water and scrub gently. You aren't trying to sanitize with this step so don't use hot water. Hot water is unnecessarily aggressive and will damage the board over time. Rinse all of the soap off when the surface is clean.

A word of caution - do not submerge portable boards in water. Water will soak into the wood fibers causing the wood to swell and warp. This breaks the glue bond in the lamination. Then as the wood dries, it cracks.

Step two - Sanitize.

Sanitize your butcher board by wiping it down with full strength white vinegar. Why vinegar? Vinegar is an effective disinfectant against common kitchen bugs such as e.coli, staphylococcus, and salmonella. Vinegar is not damaging to the wood fibers like chlorine bleach. Chlorine bleach is corrosive and it's effects are accumulative. Over time it changes the color of the wood and it breaks down the lignan (the natural glue between the fibers). The wood will look ashy even after it is oiled and the fibers will have microscopic tatters for bacteria to hide in. It's a good idea to keep a spray bottle of vinegar handy to use as a regular sanitizer for your wooden cutting surfaces.

I use vinegar and air drying to sanitize my wooden counter tops and it works great. However, if you need extra assurances, you can allow your butcher board to dry after the vinegar treatment, then wipe it down with 3% hydrogen peroxide.

After sanitizing, you can move to steps four and five, allowing the board to dry and then oiling it. Or you can do some additional deep cleaning as in step three if you have a heavy build up of oils, odors, or stains.

Step three - Deep Cleaning

Make a paste of salt and lemon juice OR water and baking soda. Using a scrubby sponge, lightly swirl the paste around focusing on stains if you have any. This paste mixture will lightly strip away old oils. It will also deodorize the wood and lighten stains. Both lemon juice and baking soda are aggressive cleaners so don't allow them to just sit on the board for hours. Just gently scrub the paste around for a few minutes and rinse it completely away when you are done.

Step four - Dry

Allow block to dry completely....over night is best. A dry environment is the best defense against bacteria, mold and virus. Allowing the board to dry completely before oiling it helps to lock moisture OUT rather than sealing it in. Also, the dryer the wood is, the more easily it will soak up oil.

Before you oil your butcher board look it over. If you still have stains use a sanding block to remove light stains or use a palm sander with a fine grit paper to sand down the entire board.

Step five - Seal with oil

Oil your butcher board. Oiling your wooden counter tops and cutting boards helps to protect the wood from damage and keeps the surface hygienic. The oil creates a water resistant barrier. It keeps the wood dry and keeps bacteria out. The best oil to use is food grade mineral oil as it will not go rancid the way vegetable based oils will. This can be found in the laxative department of your local drug store or you may find it also at your local hardware store. Just pour a little onto the board and rub it in with your clean hands or use a clean lint free rag. If you really want to pump up the water resistance of your oil, you can warm it and add bees wax or paraffin to it. Use a ratio of one part wax to nine parts oil. When this oil has soaked into your wood, it will leave behind a thin waxy layer that is even more water resistant!

Every type of counter top needs basic maintenance. Granite needs polishing. The grout in a tile counter top needs scrubbing. A wooden counter top or butcher chopping block needs to be cleaned and oiled. With a little bit of care your wooden cutting surfaces can last life times and add functional value to your kitchen.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

Knowing All About Hot Water Pressure Washers

Two types of hot water pressure washer machines are currently available: ordinary hot water machines and tri-mode machines. Before going into details of these machines, it would be worthwhile to have a look into some of their basic aspects.

Basic Features
A hot water pressure cleaner can provide an output temperature of up to 210°F. For this, these machines should contain heating elements. Normally, hot pressure cleaning machines can provide two types of output: hot water and cold water, in other words, heated output and non-heated output.

The difference between a hot pressure cleaner machine and an ordinary pressure washer lies only on its output temperature. There are machines that do not contain heating elements. These are called cold water pressure washing equipment. There are machines that can provide higher output temperatures. These are known as steam pressure washing machines, which can provide output temperatures of up to 330°F.

There is not much difference between an ordinary pressure cleaner and a tri-mod pressure washing equipment in other aspects. For example, there is no constraint on output pressure level or flow rate. Any kind of power source can be used.

Now, it is time move into different categories of hot water pressure washing equipment.

Ordinary Hot Water Machines:
These are one of the widely used cleaning machines. These are used for cleaning outdoor locations such as parks, stadiums, roads, pavement, and parking lots. These are also used as hard surface cleaners of indoor areas, such as floors and walls. Normally, ordinary hot water pressure washers are classified into two types based on the power source: machines powered by electricity and machines powered by fossil fuels.

Electricity-Powered Machines:
Pressure washing machines can have one of two types of sources for generating output pressure: an electric motor or a combustion engine. Machines that use electric motors are known as electric pressure washers, and those that use combustion engines are known as gas pressure washing machines. Heating elements can also be powered by electricity or fossil fuel. The machines that have electricity to power heating elements are known as electric-powered pressure washing equipment.

Normally, these machines are all electric pressure washers; that is, they use electricity to generate both output temperature and output pressure. These machines work smoothly and silently. Moreover, these machines do not emit any combustion byproducts.

Machines Powered by Fossil Fuels:
In such machines, the heating elements are powered by fossil fuel, such as kerosene, diesel, or gas. Such heating elements are used both in electric pressure washers and in gas pressure washers. In fact, such machines are more common than all electric machines.

Tri-Mode Machines:
This is another category of hot water pressure washer machines. These machines can provide three kinds of output temperature: cold water, hot water, and steam. Cleaning workers can change the output temperature based on the nature of the surface.

These are costlier than ordinary pressure washing equipment but suitable for cleaning companies and big factories that have varieties of surfaces to clean. The main advantage of tri-mode equipment is that they can be used to clean almost all kinds of hard surfaces. These machines definitely enhance cleaning efficiency and speed up the cleaning process.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

Monday, 2 July 2012

Inexpensive Ways to Clean Your Toilet

Baking Soda:

To clean your toilet bowl naturally, dump in half a box of baking soda and let it stand in the bowl overnight. In the morning, flush the toilet several times to remove all the dirt and grime. Run a brush around the ring to loosen any part of the ring that remains. Flush again and that's it!

With this toilet cleaning method, you can be the Queen of Green by using the baking soda that you've had open in the fridge to soak up musty odors and moisture. Just open a new box of baking soda and place it in the back of the refrigerator. Take the old box and put 1/2 box in your toilet bowl. If your home has two toilets, you can clean both of them at the same time, using 1/2 box in one toilet and 1/2 box in the other.

Baking Soda and Vinegar:

Pour one cup of white vinegar into your toilet and let it soak for half an hour. Now dip your toilet brush in the toilet bowl and sprinkle it with baking soda. Scrub the inside of the toilet bowl. Re-sprinkle the brush with baking soda a couple more times. Flush twice, and your toilet will glisten.

Note that vinegar is an excellent fungus and mold killer. If you have black mold in your toilet, especially under the rim, be sure to dip your brush in the vinegar and run the brush under the rim. Wait 30 minutes and scrub with baking soda and brush.

Borax:

If you were a child in the '50s or '60s, you may remember 20-Mule-Team Borax. This stuff will blast through lime deposits and black mold. Make a paste of Borax and lemon juice or white vinegar and rub under the toilet bowl rim and on ring. Let it sit on porcelain for awhile, scrub and rinse.

Tea Tree Oil:

Tea Tree Oil is a natural disinfectant and cleanser. Add one tablespoon to a gallon of warm water. Pour in the bowl for a few minutes. Scrub and swish. It smells good, too. You can put some of the liquid into a spray bottle and use it on the outside of the toilet, too. Since tea tree oil is an essential oil, you can buy it anywhere that natural cleaning products, essential oils and supplements are sold. A little tea tree oil goes a long way.

What About the Ring?

Bleach, Vinegar and Borax Power will obliterate a toilet bowl ring. So will scrubbing a toilet bowl ring with a pumuce stone.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source

Sunday, 1 July 2012

Before You Sign the Lease, Call a Mold Testing Company

When it comes to purchasing a home or renting an apartment, it is very important that you find out whether your potential home has a problem with mold. No one wants to live in a place where there is a life threatening problem with air quality. Even though you may not think it is that serious, simply inhaling spores can cause some serious respiratory problems later on. If you have children and pets that are going to be living with you, you want to make sure that you are moving into a healthy environment. Many owners, real estate agents and management companies will not give you a definite answer on whether or not mold is present. This is why you should leave the inspection and removal up to a certified mold testing company.

No one is saying you should have every home you are looking at should be tested, but any place you are very serious about should be looked at. Mold testing every home you like can be a bit expensive if you are not willing to weed out some of the homes yourself. Here are some things you should look for that can signal whether or not that home or apartment has a problem with mold.

Do you remember your mother flushing the toilets and looking at the pipes of any place she was interested in? There was a specific reason she did this even though she may have looked silly to you as a child. Pipes that are leaking are a sign of a potential mold problem. Look under the sinks, flush the toilets and take a look at the pipes in the basement. If you see any sign of leakage or moisture, this home may not be safe for you and your family.

Smell the air all throughout the home. If you smell a stale, musty or mildew odor, there may be some spore growth going on where you can't see it. Turn on the A/C. A lot of times mold will grow where there is moisture and the HVAC system is a big breeding ground. If you smell mildew, especially after running the air conditioner for a few moments, move on to the next home on your list.

Be on the lookout for cracked or peeling paint. Also be on the lookout for walls and ceilings that are discolored. These are all signs of an impending mold problem. If you see any rust or condensation, run don't walk out of that place.

Of course, if you see a place that you really want to purchase or lease and you suspect that there is a mold problem, you can always hire a reputable mold testing company to come and investigate. They will be able to tell you if the infestation is mild enough so it can be treated or if the infestation is so severe that the home is not safe for anyone. If you take the proper precautions now, you can avoid a lifetime of health conditions, enormous medical bills and loss of investment.


Carpet Cleaning Watford, Carpet Cleaning Harrow, Carpet Cleaning Hampstead, Office Cleaning London, Cleaning Services London, source